Start with the exact monitor and desk
A monitor arm can free up room or make it easier to change viewing position. Start by identifying the display model and desk construction. Look at the space beneath the rear edge and note whether it has an apron, cable tray, drawer, frame, or uneven surface. Write down where you want the screen relative to the keyboard and wall. An arm can be compatible with a screen and still be a poor fit for a particular desk.
This is a research-based shopping guide. Think & Buy used manufacturer specifications and workstation guidance, without conducting load, fit, or endurance tests. If the desk or monitor has an unclear mounting specification, consult its manufacturer rather than guessing. Use the exact configuration and permitted mounting hardware in the supplied instructions.
Check pattern, weight, and shape
Find the mounting pattern listed by the monitor maker. Look for the screen weight without the stand, since that is the setup you will mount. An arm may have both a minimum and maximum weight. Compare the amount with any accessories or adapter included in the actual mounted setup. A display that is well below an arm’s minimum may not adjust as expected. Do not infer compatibility from screen size alone.
Check the area around the mounting holes. A recess, connector, or monitor shell can affect how a plate seats. Consult the manufacturer’s documentation for compatible parts and screws. The Ergotron LX product page and Ergotron’s mount finder are examples of model-specific reference material. Verify the exact display and arm part number, since similarly named versions can come with different mounting hardware.
Measure the clamp location
Read the arm manual for acceptable desktop thickness and shape. Find out which surface the clamp contacts above and below. A shallow ledge, beveled edge, or frame can prevent a suitable fit even when the desktop thickness is within the advertised range. Check the desk maker’s installation guidance and use only a supported location. If the desk has a glass, hollow, or otherwise unusual top, get confirmation from the relevant manufacturer before fitting a clamp.
For a grommet attachment, confirm both the arm’s requirements and that your desk permits this setup. You need a usable position above and below the hole, not simply a hole that exists. If you intend to route cables through the same area, check how much space remains. An arm that frees up desk depth can create a different obstruction underneath if a clamp or bracket takes up a busy space.
Plot the screen’s actual reach
Measure where you expect the monitor to sit for ordinary typing or reading and where you want it to move for other tasks. Compare the minimum and maximum reach and the movement around the hinge. If the desk backs against a wall, arm sections may need space behind the display as it retracts. Check wall clearance rather than assuming a longer arm always frees more room.
Think about the top edge and bottom edge of the screen at the positions you use. A large monitor can rotate without enough clearance above the keyboard or desk, depending on the arm and starting position. If you use the screen vertically, make sure the actual range accommodates that orientation and the cables have space without strain. See our home-office monitor guide for screen placement and dimensions.
Plan the cable route
Look up where the monitor’s ports face, then follow the path from the display to the computer or dock. Include a little slack for movement within the arm maker’s recommended arrangement. A cable channel along the arm can be useful if it accommodates your cable thickness, plug sizes, and number of connections. Check if you need to remove a cover to run them and how easy adding a cable will be later. Keep cable routing consistent with the installation instructions.
Test the route through the full range of motion you plan to use. A cable that works with the screen centered might not work when pulled sideways or rotated. Check the location of the power adapter or dock and reserve space for those parts to remain accessible. If the desk moves up and down, check the entire path to wall outlets and any other equipment according to its instructions.
Compare a mount with simpler desk changes
If you mainly want the monitor a bit higher, a stand that is compatible with your desk and screen may be enough. An arm has more value if you need to reclaim the stand’s footprint or frequently change positions. If the current base is small and you rarely move the display, write down the extra function you would gain before pricing an arm. Include any approved accessories and delivery in the total.
Once the arm arrives, confirm the supported weights, hardware, and mounting approach before beginning the installation. Follow the manuals and check that the screen stays in its intended position when supported and adjusted as directed. If the arm does not meet the desk or equipment requirements, use the return window instead of modifying the mount. See our Dell monitor comparison if you are choosing the display at the same time.
A useful pre-purchase sketch shows the desk edge, intended clamp position, display outline, and usual keyboard position. Trace where the back of the monitor would be when fully retracted, then check where cables may need to turn. Make sure the mounting area is accessible while following the installation instructions. A large screen can make it hard to reach a rear adjustment even if the arm meets its weight range. Check where you normally sit and whether you can change positions without pulling the monitor farther forward than you intended. If the same workspace is used for a second screen, draw where that screen moves as well.
A separate decision is whether an arm will save space in the places that matter. Place a few objects that compete for space on your current desk, such as a notebook, a dock, or a small laptop. Decide which ones would benefit from taking the stand base away. If the space is already easy to use, that alone may not justify the purchase. If you work at a desk that changes height or is also used by someone else, document the settings you would want for both people. Then compare the reach and height of the exact arm model to both arrangements rather than assuming the wider adjustment range is always more useful.
Before you order, confirm how the package differs from the photos in the listing. Some images can show optional plates or another finish with a slightly different mount. Find the installation instructions for the actual part number and compare the included hardware. If a compatible plate or mount is required, include it in the total delivered cost.
Frequently asked questions
Is a monitor arm compatible with all displays of a certain size?
Compare the screen’s mount pattern, weight, and physical shape with the arm’s documentation. Size is only one of the compatibility checks.
Is a clamp better than a grommet mount?
The right choice depends on the desk and mount. Verify the construction, thickness, usable positions, and manufacturer instructions for both.
Will a monitor arm free up the entire back of my desk?
It can free the original stand’s footprint, but the clamp, moving joints, and cables need space. Measure both above and below the planned location.